GENERAL DESCRIPTION

The SGM41102/SGM41102A is designed for primary

protection of Li-Ion/polymer rechargeable cells. The

product integrates all the protections required for safe

operation of polymer rechargeable cells. The device is

packaged in a tiny and thin package. Its small solution

size leaves more space for fitting the battery cell into a

given cavity for small size wearable devices.

The SGM41102/SGM41102A integrates all the

protections and the required low on-resistance

disconnect switch on one die. The protection features

include charge and discharge protection, detection and

protection of a cell in over-charge, over-discharge,

over-current, and battery under-voltage. The product also

disconnects the battery pack in the case of deep

discharge.

The SGM41102/SGM41102A operates in -40℃ to +85℃

temperature range, and is in a thin and low profile

UTDFN-1.5×2-6L package. This package with a nominal

height of 0.5mm is convenient for small cell packing

designs

FEATURES

● Ultra-Compact Protection Solution

● Pass Resistance: 43mΩ (TYP)

● Operation Current: 1.8μA (TYP)

● Factory Programmable OVP Threshold Options

4.20V to 4.575V with 0.025V per Step

● Over-Charge/Discharge Current Protection

4 Thresholds Combination Options

● Over-Discharge Current Protection Selection

 SGM41102: One Time Latch when OCD Trigger

 SGM41102A: Continue Retry to Detect Loading

Recovery

● Battery Under-Voltage Protection

2.6V/2.7V/2.8V/3.0V Options

● 50nA Deep Discharge Shutdown

● 0V Battery Charging

● Input Surge Clamping

● Input Over-Voltage Safe

● Load Short-Circuit Safe

● Reverse Polarity Battery Safe

● Input Reversed-Attaching Safe

● Battery Pack Paralleling Safe

● Locked-Off for Delivery/Assembly

● Available in a Green UTDFN-1.5×2-6L Package

APPLICATIONS

IoT Gadgets

Wearable Devices

Battery Packs