GENERAL DESCRIPTION

The MSM7716P is an extended temperature range version for the MSM7716 which is a single-channel CODEC CMOS IC for voice signals that contains filters for linear A/D and D/A conversion.

Designed especially for a single-power supply and low-power applications, the device is optimized for applications for the analog interfaces of audio signal processing DSPs and digital wireless systems.

The analog output signal can directly drive a ceramic type handset receiver. In addition, levels for analog outputs can be set by external control.

FEATURES

• Single power supply : +3.0V to +3.6 V

• Operating temperature : -40°C to +85 °C

Remarks : Standard operating temperature range version MSM7716 (without “P”)

- Power Supply Voltage : +2.7V to +3.6 V

- Operating temperature : -30°C to +85 °C

• Low power consumption

Operating mode : 30 mW Typ.

Power down mode : 0.05 mW Typ.

• Digital signal input/output interface : 14-bit serial code in 2s complement format

• Sampling frequency(fs) : 4 to 16 kHz

• Transmission clock frequency : fs × 14 min., 2048 kHz max.

• Filter characteristics : when fs = 8 kHz, complies with ITU-T Recommendation G. 714

• Built-in PLL eliminates a master clock

• Two input circuits in transmit section

• Two output circuits in receive section

• Transmit gain adjustable using an external resistor

• Receive gain adjustable by external control 8 steps, 4 dB/step

• Transmit mic-amp is eliminated by the gain setting of a maximum of 36 dB.

• Analog outputs can drive a load of a minimum of 1 kΩ ; an amplitude of a maximum of 4.0 VPP with push-pull driving.

• Built-in reference voltage supply

• Package options:

30-pin plastic SSOP (SSOP30-P-56-0.65-K) (MSM7716PMB)