Application Information

The TPMC810 is a standard single-width 32 bit PMC with

two independent CAN bus channels, isolated from system

logic and from each other.

Two Philips SJA1000 CAN controllers (CAN specification

2.0B supported) are used.

CAN High Speed transceivers are used for the CAN bus I/O

interface. An on board termination option (DIP switches) is

provided for each CAN bus channel allowing to configure

on board termination and pass through mode.

Each channel can generate an interrupt on INTA. Interrupts

can be enabled and disabled separately.

The TPMC810 provides front panel I/O via two DB9 male

connectors and rear panel I/O via P14.

Software support (TDRV010-SW-xx) for different operating

systems is available