1 Features

• 3.3 V Single supply operation

– Eliminates the 5 V regulator saving BOM cost

and reducing PCB space

• Compatible with the requirements of ISO

11898-2:2016 physical layer standard

• Support of classical CAN and optimized CAN FD

performance at 2, 5, and 8 Mbps

– Short and symmetrical propagation delays for

enhanced timing margin

• TCAN3413: I/O voltage range supports:

1.7 V to 3.6 V

• Receiver common mode input voltage: ±30 V

• Protection features:

– Bus fault protection: ±58 V

– Undervoltage protection

– TXD-dominant time-out (DTO)

– Thermal-shutdown protection (TSD)

• Operating modes:

– Normal mode

– Low power standby mode supporting remote

wake-up request

– Ultra-low power shutdown mode:

TCAN3414 only

• Optimized behavior when unpowered

– Bus and logic pins are high impedance (no load

to operating bus or application)

– Hot-plug capable: power up or down glitch-free

operation on bus and RXD output

• 8-Pin SOIC, small footprint SOT-23 and lead less

VSON-8 package with improved automated optical

inspection (AOI) capability

2 Applications

• Factory automation

• Grid Infrastructure

• Industrial transport

• Motor drives

3 Description

The TCAN3413 and TCAN3414 are controller area

network (CAN) FD transceivers that are compatible

with the physical layer requirements of the ISO

11898-2:2016 high-speed CAN specification.

The transceivers have certified electromagnetic

compatibility (EMC) operation for use with classical

CAN and CAN FD networks up to 5 megabits

per second (Mbps). Up to 8 Mbps operation in

simpler networks is possible with these devices. The

TCAN3413 includes internal logic level translation

through the VIO pin. Allowing the direct interface of the

transceiver I/O to 1.8-V, 2.5-V, or 3.3-V logic levels.

The transceivers support a low-power standby mode,

and a wake over CAN which is compliant to the ISO

11898-2:2016 defined wake-up pattern (WUP).

The transceivers include thermal-shutdown (TSD),

TXD-dominant time-out (DTO), supply undervoltage

detection, and ±58-V bus fault protection. The devices

have defined fail-safe behavior in supply undervoltage

or floating pin scenarios. The transceivers are

available in industry-standard SOIC-8, the VSON-8,

and a space-saving small footprint SOT-23 packages.