Operating Voltage Range of 4.5 V to 5.5 V

State-of-the-Art BiCMOS Design

Significantly Reduces ICCZ

Full Parallel Access for Loading

ESD Protection Exceeds JESD 22

− 2000-V Human-Body Model (A114-A)

− 200-V Machine Model (A115-A)

− 1000-V Charged-Device Model (C101)

description/ordering information

These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively

low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional

bus drivers, and working registers.

The eight flip-flops of the ’BCT574 devices are edge-triggered D-type flip-flops. On the positive transition of the

clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs.

A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high

or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive

the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus

lines without interface or pullup components.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

参考价格：15.3534

型号：SN74BCT574N 品牌：Texas 说明：SN74BCT574N多少钱，2026年最近一个月行情走势，SN74BCT574N批发/采购报价，SN74BCT574N行情走势销售排行榜，SN74BCT574N报价。