Description

This elastomer is designed for fabric, textile or cloth coating

applications where a tough coating and excellent adhesion is

needed.

Key Features

● Fast cure at elevated temperatures

● Low linear shrinkage

● Transparent, ideal for pigmentation

● Low viscosity and good inhibition resistance

Application

Optically clear

Use and Cure Information

Important

The A part of this elastomer contains the platinum catalyst;

great care should be taken when using automated dispensing

equipment to not cross-contaminate systems.

Mixing

Both the A and B parts should be well stirred to ensure the

material is uniform. The elastomers should be mixed by weight.

Once they are mixed, the curing process begins. The gel time of

the mixed material is listed under the typical properties. Fast

curing gels should be dispensed utilizing automated mix and

dispensing equipment. In order to achieve optimum performance,

the same A and B side lot number should be used.

De-Aeration

Air trapped during mixing should be removed to eliminate voids in

the cured product. Vacuum de-airing may be necessary to

completely remove all entrapped air bubbles. To ensure proper

de-airing, subject the mixed material to 29 inches mercury.

Storage and Self-life

This product is best when used within 24 months for the date of

manufacture; see product label and/or the CoA for the specific

use by date. Product should be stored in its original. unopened

container in an environment that does niot exceed 38°C (100°F).

Storage beyond the date specified on the label does not

neccessarily mean that the product is no longer usable. In this

case, the properties required for the intended use should be

checked for quality assurance reasons.