Description
The OPB120 through OPB123 devices consist of an infrared emitng diode and a Photologic® sensor (which is a monolithic integrated circuit that incorporates a linear amplifer and a Schmit Trigger). The OPB120 series have an LED and Photologic® sensor mounted on opposite sides of a 0.080” (2.03 mm) wide gap of an opaque housing. The OPB12_A series have a molded 0.040” (1.02 mm) wide apertures located over both the emiter and the Photologic® sensor. The OPB12_B seriesseries have a molded 0.040” (1.016 mm) wide apertures located over the emiter and 0.010” (0.254 mm) over the Photologic® sensor. All devices in this series have the added stability utlizing hysteresis built into the amplifcaton circuitry.
Features:
• Choice of output confguraton
• Printed circuit board mountng
• Opaque plastc housing
• Low profle
• 0.080” (2.03 mm) wide slot
• 0.275” (6.99 mm) lead spacing
Applications:
• Mechanical switch replacement
• Speed indicaton (tachometer)
• Mechanical limit indicaton
• Edge sensing
• Object sensing
TE/泰科
287692
/
OPTEK
8900
OPTEK
85600
SMD
OPTEK
48
OPTEK
18
con
SMD
100500
SMD
TT Electronics Resistors
500000
封装
TT
30098
TT Electronics
5864
OPB315L
OPTEK
20500
标准
OPTEK
1800
CJ
8000
SOT-23
OPTEK
8800
OPTEK
6000
DIP4
optec
6980
N/A