General Description

The MAX77887 is a high-efficiency nano power buckboost

converter with an input voltage monitoring feature,

ensuring that the battery voltage does not drop below

the pre-set threshold levels to protect the battery.

The converter operates on an input supply between 1.8V

and 5.5V. Output voltage between 1.8V and 5.2V is

configured through a resistor connected to the hardware

control pin, RSEL1. It can operate in CCM, Skip, and Low

Power Mode to ensure maximum efficiency over a wide

range of load currents.

MAX77887 offers two unique hardware control pins

RSEL1 and RSEL2. The resistor connected at SEL1

(RSEL1) selects the predefined output voltage from 1.8V

to 5.2V as OUT. The resistor connected at SEL2

(RSEL2) allows the configuration of two different

Switching Current Limit (ILIM) levels and 16 Input

Voltage Monitoring Threshold levels.

The MAX77887 is available in 1.36mm x 1.36mm, 9-

bump, 0.4mm pitch, wafer-level package (WLP).

Benefits and Features

• 1.8V to 5.5V Input Voltage

• Output Voltage from 1.8V to 5.2V

• Peak Efficiency of 92.5% (5.5VIN, 3.8VOUT)

• 430nA Typical Quiescent Current

• 10nA Shutdown Current

• RSEL Configurations

• Output Voltage

• 400mA/200mA Switching Current Limit

• 16 Input Voltage Monitoring Threshold

Levels

• Protection Features

• Input Undervoltage Lockout (UVLO)

• Switching Current Limit

• Thermal Shutdown (THS)

• 1.36mm x 1.36mm, 9-Bump, 0.4mm Pitch, WLP

Applications

• LPWAN SoC Companion Power Solution

• IoT and Wearable Applications

• Asset Trackers

• Smart Meters