General description

The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA).

They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS.

The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB host transceiver. They can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.

ISP1105 allows single/differential input modes selectable by a MODE input and it is available in HBCC16 package. ISP1106 allows only differential input mode and is available in both TSSOP16 and HBCC16 packages. ISP1107 allows only single-ended input mode and is available in both TSSOP16 and HBCC16 packages.

Features

■ Complies with Universal Serial Bus Specification Rev. 1.1

■ Integrated bypassable 5 V to 3.3 V voltage regulator for powering via USB VBUS

■ VBUS disconnection indication through VP and VM

■ Used as a USB device transceiver or a USB host transceiver

■ Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates

■ Stable RCV output during SE0 condition

■ Two single-ended receivers with hysteresis

■ Low-power operation

■ Supports an I/O voltage range from 1.65 V to 3.6 V

■ 4 kV on-chip ESD protection

■ Full industrial operating temperature range −40 to +85 °C

■ Available in small TSSOP16 (except ISP1105) and HBCC16 packages.

Applications

■ Portable electronic devices, such as:

◆ Mobile phone

◆ Digital still camera

◆ Personal Digital Assistant (PDA)

◆ Information Appliance (IA).