1 Features
• Isolated bidirectional, I2C compatible,
communication
• Supports up to 1-MHz operation
• 3-V to 5.5-V supply range
• Open-drain outputs With 3.5-mA Side 1 and 35-
mA Side 2 sink current capability
• –40°C to +125°C operating temperature
• ±50-kV/μs transient immunity (Typical)
• HBM ESD protection of 4 kV on all pins;
8 kV on bus pins
• Safety-related certifications:
– 4242-VPK isolation per DIN EN IEC 60747-17
(VDE 0884-17)
– 2500-VRMS isolation for 1 minute per UL 1577
– CSA approval per IEC 62368-1 end equipment
standard
– CQC basic insulation per GB4943.1-2011
2 Applications
• Isolated I2C buses
• SMBus and PMBus interfaces
• Open-drain networks
• Motor control systems
• Battery management
• I2C level shifting
3 Description
The ISO1540 and ISO1541 devices are low-power,
bidirectional isolators that are compatible with I2C
interfaces. These devices have logic input and output
buffers that are separated by Texas Instruments
Capacitive Isolation technology using a silicon dioxide
(SiO2) barrier. When used with isolated power
supplies, these devices block high voltages, isolate
grounds, and prevent noise currents from entering
the local ground and interfering with or damaging
sensitive circuitry.
This isolation technology provides for function,
performance, size, and power consumption
advantages when compared to optocouplers. The
ISO1540 and ISO1541 devices enable a complete
isolated I2C interface to be implemented within a
small form factor.
The ISO1540 has two isolated bidirectional channels
for clock and data lines while the ISO1541 has a
bidirectional data and a unidirectional clock channel.
The ISO1541 is useful in applications that have a
single controller while the ISO1540 is suitable for
multi-controller applications. For applications where
clock stretching by the target is possible, the ISO1540
device should be used.
Isolated bidirectional communication is accomplished
within these devices by offsetting the low-level output
voltage on side 1 to a value greater than the highlevel
input voltage on side 1, thus preventing an
internal logic latch that otherwise would occur with
standard digital isolators.
参考价格:15.8919
型号:ISO1541D 品牌:TI 说明:ISO1541D多少钱,2026年最近一个月行情走势,ISO1541D批发/采购报价,ISO1541D行情走势销售排行榜,ISO1541D报价。
TI
300000
TI/德州仪器
18000
SOP-8
TI/德州仪器
10000
SOP-8
TI/德州仪器
12496
SOP8
TI
8575
SOP8
ISO1541D
TI(德州仪器)
10548
SOIC-8
TI/德州仪器
53200
SMD
TI/德州仪器
9000
SOIC8
TI/德州仪器
5000
NA
TI
95
SOP8
TI/德州仪器
46780
SOP8
TI/德州仪器
5000
SOP8
TI(德州仪器)
18816
SOP8
TI/德州仪器
18204
SOIC8
TI
918000
SMD
ISO1211DR数字隔离器主要用于电气隔离和信号传输的应用。它适用于电气隔离、信号传输、数据通信、传感器隔离和工业控制等领域,可以提供可靠的隔离和信号处理功能,保护系统免受干扰和电气问题的影响。
发布时间:2023-06-20