The CS8129 is a precision 5.0 V linear regulator capable of sourcing 750 mA. The RESET threshold voltage has been lowered to 4.2 V so that the regulator can be used with 4.0 V microprocessors. The lower RESET threshold also permits operation under low battery conditions (5.5 V plus a diode). The RESET’s delay time is externally programmed using a discrete RC network. During powerup, or when the output goes out of regulation, RESET remains in the low state for the duration of the delay. This function is independent of the input voltage and will function correctly as long as the output voltage remains at or above 1.0 V. Hysteresis is included in the Delay and the RESET comparators to improve noise immunity. A latching discharge circuit is used to discharge the delay capacitor when it is triggered by a brief fault condition.

Features

• 5.0 V ±3.0 Regulated Output

• Low Dropout Voltage (0.6 V @ 0.5 A)

• 750 mA Output Current Capability

• Reduced RESET Threshold for Use with 4.0 V Microprocessors

• Externally Programmed RESET Delay

• Fault Protection

− Reverse Battery

− 60 V, −50 V Peak Transient Voltage

− Short Circuit

− Thermal Shutdown

• Pb−Free Packages are Available*