1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

• ADC Core:

– Resolution: 9 Bit

– Non-interleaved architecture

– Internal dither reduces high-order harmonics

• Performance specifications:

– SNR (–1dBFS, 97MHz): 53.5dBFS

– ENOB (–1dBFS, 97MHz): 8.51 Bits

– SFDR (–1dBFS, 97MHz): 64dBFS

– Noise floor (–20dBFS, 97MHz): –

140.5dBFS/Hz

• Full-scale input voltage: 800mVPP-DIFF

• Full-power input bandwidth: 6GHz

• JESD204C Serial data interface:

– Support for 2 to 8 (Quad/Dual channel) or 1 to 4

(Single channel) total SerDes lanes

– Maximum baud-rate: 17.16Gbps

– 64B/66B and 8B/10B encoding modes

– Subclass-1 support for deterministic latency

– Compatible with JESD204B receivers

• Optional internal sampling clock generation

– Internal PLL and VCO (7.2–8.2GHz)

• SYSREF Windowing eases synchronization

• Four clock outputs simplify system clocking

– Reference clocks for FPGA or adjacent ADC

– Reference clock for SerDes transceivers

• Timestamp input and output for pulsed systems

• Power consumption (800MSPS):

– Quad Channel: 420mW / channel

– Dual channel: 555mW / channel

– Single channel: 840mW

• Power supplies: 1.1V, 1.9V

2 Applications

• Light detection and ranging (LiDAR)

3 Description

ADC09xJ800-Q1 is a family of quad, dual and single

channel, 9-bit, 800MSPS analog-to-digital converters

(ADC). Low power consumption, high sampling

rate and 9-bit resolution makes the ADC09xJ800-

Q1 suited for light detection and ranging (LiDAR)

systems. The ADC09xJ800-Q1 is qualified for

automotive applications.

Full-power input bandwidth (-3dB) of 6GHz provides

flat frequency response for frequency modulated

continuous wave (FMCW) LiDAR systems and

provides a narrow impulse response for pulse-based

systems. The full-power input bandwidth also enables

direct RF sampling of up to 4GHz.

A number of clocking features are included to relax

system hardware requirements, such as an internal

phase-locked loop (PLL) with integrated voltagecontrolled

oscillator (VCO) to generate the sampling

clock. Four clock outputs are provided to clock the

logic and SerDes of the FPGA or ASIC. A timestamp

input and output is provided for pulsed systems.

JESD204C serialized interface decreases system size

by reducing the amount of printed circuit board (PCB)

routing. Interface modes support from 2 to 8 lanes

(dual and quad channel devices) or 1 to 4 lanes (for

the single channel device), with SerDes baud-rates up

to 17.16Gbps, to allow the optimal configuration for

each application.